OVEM
72
Festo – OVEM – 1407c English
5
Installation
Any mounting position is permitted. Mount the vacuum suction nozzle and connect its tubing in such a
way that no condensation from the compressed air lines can gather in the device.
Note
An unfavourable mounting position can result in increased sound pressure.
During installation, make sure that the exhaust can flow without hindrance.
5.1
Mechanical
5.1.1
Direct mounting
Fig. 7
Direct mounting
Mount the vacuum suction nozzle at the intended position with two screws (size of the mounting
screws
è
Tab. 5), assembly torque max. 2.5 Nm.
We recommend the use of corresponding washers.
or
Mount the vacuum suction nozzle on the bottom with 4 screws, size M3, with max. mounting torque
0.8 Nm.
OVEM
Size of mounting screws
-05/-07/-10
M5
-14/-20
M4
Tab. 5
Size of mounting screws
5.1.2
Mounting with accessories
The required accessories are listed in
è
Accessories.
Summary of Contents for OVEM
