HMP−...−B−...
Festo HMP−...−B−... 0408NH English
41
S
Carry out the following steps:
1. Exhaust linear module type HMP−...−B.
2. Push the guide tube into the desired end
position.
3. Loosen all four/five stop screws with a
hexagon socket wrench until the stop
retainer
aF
can be shifted.
4. First shift the stop retainer
until the stop touches the head of the
shock absorber, then
further over length X of the shock
absorber stroke.
HMP−...
16
20/25
32
Length X
12 mm
18 mm
24 mm
Fig.28
5. Tighten all four stop screws again with a tightening torque of 5.3 ... 6.5 Nm.
6. Repat the settings for the opposite end position.
Commissioning carrying out
Warning
S
Make sure that:
nobody can place his/her hand in
the path of the moving parts (e.g. by
providing a protective screen)
there are no objects within the path
of the moving parts.
Fig.27
aF
Fig.29
Summary of Contents for HMP-x-B Series
Page 55: ...HMP B Festo HMP B 0408NH 55...