HMP−...−B−...
Festo HMP−...−B−... 0408NH English
40
6
Commissioning
Commissioning preparation
Rough adjustment of an end position
Please note
S
Make sure that the minimum distance L
of the stop on the extended and re
tracted end positions is not exceeded.
Otherwise the piston will strike
unbraked against the mechanical end
position.
The minimum distances L are listed in the following table:
HMP−...
16
20
25/32
Dimension L
out
(extending)
19.5 mm
27 mm
0.5 mm
Dimension L
in
(retracting)
0.5 mm
0.5 mm
0.5 mm
Fig.26
Please note
S
Make sure that the stop is screwed in completely.
Otherwise the accurate adjustment of this end position can only be made to a
limited extent. If necessary, loosen the locking screw aG and screw the stop
in again completely.
Fig.25
Summary of Contents for HMP-x-B Series
Page 55: ...HMP B Festo HMP B 0408NH 55...