HMP−...−B−...
Festo HMP−...−B−... 0408NH English
48
6. Turn the elements as follows:
Unscrew completely the adjusting
sleeve with the shock absorber.
Unscrew the shock absorber from the
adjusting sleeve.
Screw in the new shock absorber from
the repair set.
Screw in the adjusting sleeve with the
shock absorber up to the marking.
7. Tighten the locking screws again.
HMP−...
16
20/25
32
Nm
2.9
5.9
Fig.41
8. Tighten the locking nut of the shock
absorber again.
The tightening torque is:
HMP−...
16
20/25
32
Nm
5
20
35
Fig.43
9. Fasten the housing cover again.
10. Complete re−commissioning of the HMP−...−B in accordance with the chapter
Commissioning.
S
Make sure that the linear module HMP−...−B is overhauled only by our repair
service.
Fig.39
Fig.40
Fig.42
Summary of Contents for HMP-x-B Series
Page 55: ...HMP B Festo HMP B 0408NH 55...