Festo CPX-FB13, Manual

Page: 24 / 63

3 Installation
24 Festo – P.BE-CPX-CTEL-EN – 1411a – English
Current consumption from U
EL/SEN
of the CPX terminal
Internal electronics current consumption, CTEL master module approx. 0.06 A
Internal electronics current consumption, device I-port 1
1)
_____ A
Sensor current consumption at I-port 1
1)
+_____ A
Sum of the current consumption at I-port 1 (max. 1.6 A) =_____ A +_____ A
Internal electronics current consumption, device I-port 2
1)
_____ A
Sensor current consumption at I-port 2
1)
+_____ A
Sum of the current consumption at I-port 2 (max. 1.6 A) =_____ A +_____ A
Internal electronics current consumption, device I-port 3
1)
_____ A
Sensor current consumption at I-port 3
1)
+_____ A
Sum of the current consumption at I-port 3 (max. 1.6 A) =_____ A +_____ A
Internal electronics current consumption, device I-port 4
1)
_____ A
Sensor current consumption at I-port 4
1)
+_____ A
Sum of the current consumption at I-port 4 (max. 1.6 A) =_____ A +_____ A
Sum of the current consumption of the CTEL system (max. 9 A
2)
) =_____ A
1) See manufacturer’s specifications
2) Limit value within a voltage zone, minus the other consumers within the voltage zone
Tab. 3.1
An additional power supply of 1.6 A per I-port can be made available through the load
voltage supply U
VAL
.