Festo CP-A08 Series, Manual

Page: 52 / 67

2.3.2 Connecting the output module
WARNING
Please observe the maximum permitted string
lengths. In this way you will avoid faults in data
exchange between the output module and the
higher-order system (e.g. field bus node).
Use only the following cables to connect the
modules.
For connection to Max. permitted
string length Cable type
Field bus node
with CP connection 10 m - KVI-CP-1-...
or
- KVI-CP-2-...
(can be used as
drag chain)
Axis interface
type SPC-AIF-... See manual for the
SPC200 type
P.BE-SPC200-...
Powerbox
Type CP-FB-TBOX-
... See manual for the
higher-order
system
Communication takes place via the CP cable and the
operating voltage for the internal electronics of the mo-
dule is also supplied via the CP cable.
The output module is connected directly to the CP con-
nection of the higher-order system (field bus node, axis
interface or Powerbox). Detailed instructions can be
found in the relevant system manual.
2. Output module type CP-A08...-M12-...
CP-A08...-M12 9901b
2-13