Festo CP-A08 Series, Manual

Page: 57 / 67

Status LED Sequence Operating status Error treatment
LED lights up
Operating voltage applied None
LED is out
- Operating voltage not
applied or no connection
to node
or
In conjunction with the CP
node
- incorrect string assignment
during operation
In conjunction with the
SPC200
- see user manual
for the SPC200
•
Check CP cable and
operating voltage
connection on the node
(pin 1)
or
•
correct string
assignment
•
See user manual
type P.BE-SPC200-...
LED flashes
quickly
- Test phase when power
supply is switched on
or
- short circuit/overload on
at least one output module
or
In conjunction with the CP
node
- incorrect string assignment
when power supply is
switched on
In conjunction with the
SPC200
- see user manual
for the SPC200
•
None
or
•
eliminate short
circuit/overload
and reset output
1)
or
•
check string assignment
2)
•
See user manual
type P.BE-SPC200-...
LED flashes
slowly
Load voltage failure Restore load
voltage
1) If there is a short circuit/overload, all outputs of the module will be switched off
automatically. The error must be eliminated when the outputs are reset e.g. by user
program.
2) When the line assignment has been modified (CP modules added or removed), you must
store the new string assignment by pressing the SAVE button on the node.
ON
OFF
ON
OFF
ON
OFF
ON
OFF
2. Output module type CP-A08...-M12-...
2-18
CP-A08...-M12 9901b