2. Safety instructions for electric drives and controllers
16
Festo P.BE-CMMP-AS-3A-HW-EN 0708NH
See Chapter 7.13 (page 82) for instructions on EMC-compliant in-
stallation.
The manufacturer of the system or machine is responsible for en-
suring that the limit values requested by the national regulations
are observed.
Warning
See this product manual for the specifications, connection and
installation conditions for the servo drive controller, which must
always be observed.
Warning
DANGER!
The general installation and safety regulations for working on
high-current systems (e.g. DIN, VDE, EN, IEC or other national
and international regulations) must be observed here.
Failure to observe these regulations can lead to bodily injury, death
or considerable damage to property.
The following precautionary measures also apply without claim to
completeness:
VDE 0100
Regulations for setting up high-voltage systems up
to 1,000 volts
EN 60204-1
Electrical equipment for machines
EN 50178
Equipping high-voltage systems with electronic
devices
EN ISO 12100 Machine safety – definitions, general design guide-
lines
EN 1050
Machine safety – risk evaluation guidelines
EN 1037
Machine safety – preventing unexpected starts
EN 954-1
Safety related control system parts
2.4.2
Safety instructions for assembly and maintenance
For assembling and maintaining the system, the relevant DIN, VDE, EN and IEC regulations,
as well as all national and local safety and accident prevention regulations must always be
observed. The system manufacturer or the user is responsible for ensuring that these regu-
lations are observed:
Summary of Contents for CMMP-AS-C2-3A
Page 2: ......