2. Safety instructions for electric drives and controllers
Festo P.BE-CMMP-AS-3A-HW-EN 0708NH
15
2.4
Safety instructions
2.4.1
General safety information
Warning
The servo drive controller conforms to protection class IP20, and
contamination class 1.
Ensure that the working environment also complies with this
protection/contamination class.
Warning
Use only accessories and spare parts which are approved of by the
manufacturer.
Warning
In accordance with the EN standards and the VDE regulations, the
servo drive controller must be connected to the grid such that they
can be disconnected using appropriate isolating equipment (e.g.
main switch, contactor, circuit breaker).
The servo drive controller can be fused with a 300 mA all-current
sensitive fault-current circuit breaker (RCD = Residual Current pro-
tective Device).
Warning
For switching the control contacts you should use gold-plated con-
tacts or high-pressure contacts.
Precautionary measures must be taken for preventing interference
to switching systems, e.g. switching protective switches and relays
with RC elements or diodes.
You must observe the safety regulations and directives of the coun-
try in which the device is to be used.
Warning
The environmental conditions specified in the product docu-
mentation must be observed.
Safety-critical applications are not permitted if they are not explic-
itly approved of by the manufacturer.
Summary of Contents for CMMP-AS-C2-3A
Page 2: ......