Festo Checkbox Compact CHB-C-X, Manual

Page: 46 / 148

2. Fitting and commissioning
2−16
Festo P.BE−CB−COMP−en en 0503c
Before the Checkbox is switched on the first time, make sure
that you have completed the following steps:
1. the conveyor device must be fitted.
2. the Checkbox must be mounted on the conveyor device.
3. the operating voltage must be connected at the 24VDC
connection.
4. external components are connected if required.
Observe the instructions on connecting external compo
nents in the following chapters:
chapter 3.2 Actuators"
chapter 3.3 Buffer zone sensors, small parts
conveyor"
Type CHB−C−P/..X:
chapter 4.2 Encoder"
chapter 4.3 Higher−order controller"
Warning
Check to see which measures are necessary for putting
your machine/system in a safe state when it is switched on
and off. Sudden unexpected movements of the connected
actuators can cause injury to human beings and damage
to property if e.g.
the conveyor device is moved to its basic position when
the power supply is switched off.
the conveyor device starts automatically if controlled by
the Checkbox when the Checkbox starts.
In order to prevent the conveyor device from starting auto
matically when the operating voltage is switched on:
·
Select in CheckKon [Window] [System parameters]
a
System
a
Operating modes ...
a
Automatic start after
power supply on = no (factory setting).