Festo Checkbox Compact CHB-C-X, Manual

Page: 48 / 148

2. Fitting and commissioning
2−18
Festo P.BE−CB−COMP−en en 0503c
TEACH mode Scan the sample parts in the TEACH mode in order to record
the Teach data.
Please note
The following list provides only an overview of the most
important operating steps. Note the instructions on the
Teach procedure in chapter 5, before you start the Check
box in the TEACH mode.
Stop The Checkbox is ready to operate as soon as it is switched
on (Stop status).
1 o1
C 30
1. Press button STATUS/ TEACH .
Scan the sample parts of parts type 1 in orientation 1.
During scanning the C" value of the characteristic
scatter will be shown (e.g. 30)
1 o2
2. Press button STATUS/ TEACH .
Scan sample parts in the next orientation (2).
Repeat the procedure for further orientations.
Stop
3. Press button START/ STOP .
The Teach data will be saved and the TEACH mode will be
concluded.