MACHINES AND
ACCESSORIES
Page 9 of 44
23. It is recommended that users of this publication, for maintenance and repair, have a
basic knowledge of mechanical principles and of repair technique procedures.
24.
The person responsible for company safety is to make sure that the staff
responsible for using the machine have read and understood this manual in its
entirety.
25.
The person responsible for company safety must also verify the company's risk
status in accordance with the Consolidated Act on protection of health and
safety in the workplace of Legislative Decree 81/08.
2.2 General safety regulations for electric machine tools
Risks associated with the use of the machine
Do not modify the electrical system in any way. Any attempt in this regard may jeopardize
the operation of electrical devices, causing malfunction or accident.
Work carried out in the electrical system of the machine must, therefore, be carried out
only by qualified and authorized personnel.
If one hears unusual noises, or feels something strange, immediately stop the machine.
Then carry out an inspection and, if necessary, perform any repairs as required.
1.
The supply voltage must correspond to that stated on the identification plate and in the
technical specifications: Precisely: 400 V AC / 50 Hz.
Never use any other type of power supply!
2.
The use of a lifesaving device on the power supply line is recommended. For more
detailed information, contact a trusted electrician.
3.
The power plug must be equipped with a grounding conductor. Any extension cords
must be of equal or greater length than the power cord on the machine (
1.5 mm
2
).
4.
The power cord and extension should not come in contact with hot objects, wet or oiled
surfaces, and/or sharp edges.
5.
The power cord should be checked regularly and before each use to check for signs of
damage or wear. If these are not in good condition, do not use the machine and replace
the cable.
6.
Do not use the power cord to disconnect the plug.
fervi.com
Summary of Contents for T066
Page 37: ...MACHINES AND ACCESSORIES Page 37 of 44 14 EXPLODED VIEW AND SPARE PARTS f e r v i c o m...
Page 39: ...MACHINES AND ACCESSORIES Page 39 of 44 f e r v i c o m...
Page 42: ...MACHINES AND ACCESSORIES Page 42 of 44 f e r v i c o m...
Page 44: ...MACHINES AND ACCESSORIES Page 44 of 44 15 WIRING PLAN f e r v i c o m...
