Fervi T066, Operation And Maintenance Manual

Page: 5 / 44

MACHINES AND
ACCESSORIES
Page 5 of 44
1 INTRODUCTION
This manual is delivered with the machine, and it must be regarded as an inseparable part of
it.
The manufacturer holds all ownership to material and intellectual property of this manual;
any disclosure or copying, even partial, of this publication without prior written consent is
forbidden.
The purpose of this manual is to provide the knowledge required for the use and maintenance
of the Drilling machine
(Art.-T066) and create a sense of responsibility and an
understanding of the possibilities and limits of the device given to the operator.
As a processing machine is entrusted to experienced and skilled operators, the following
machine must be perfectly known by its operator if it is to be used safely and effectively.
Operators must be properly trained and prepared, so make sure that this manual is read and
consulted by the staff responsible for commissioning, operation and maintenance of the
Drilling machine. This is to make all operations the safest and most effective possible for
those who carry out these tasks.
Therefore, it is imperative to strictly comply with the requirements in this manual, a
necessary condition for safe and satisfactory operation of the machine.
Before starting operation, installation and usage of the Drilling machine, authorised personnel
must:
 carefully read this technical document;
 know which protections and safety devices are available on the machines, their location
and how they work.
The buyer is responsible for ensuring that users are properly trained, that they are aware of
all the information and instructions in this document and that they are aware of the potential
risks of operating the Drilling machine.
The manufacturer waives any and all responsibility for damage to people and/or
things caused by non-observance of the instructions in this manual.
The Drilling machine has been designed and built with mechanical guards and safety devices
designed to protect the operator / user from possible injury. It is strictly forbidden to modify
or remove guards, safety devices and caution labels. If this must be done (for example, for
cleaning or repair), make sure that no one can use the machine.
Modifications to the machine carried out by the user must be considered their sole
responsibility, therefore the manufacturer waives any and all responsibility for any
damage caused to persons and/or property resulting from maintenance performed
by unqualified personnel and in a manner unlike the operating procedures shown
below.
fervi.com