Fervi T066, Operation And Maintenance Manual

Page: 7 / 44

MACHINES AND
ACCESSORIES
Page 7 of 44
2 GENERAL SAFETY WARNINGS
2.1 General safety rules for machine tools
Accident
 The operation of drilling or tapping always presents a risk of injury associated with the
possibility of accidental contact of parts of the body with the tool in motion, detachment of
splinters from the workpiece, tool breakage, or ejection of a badly blocked piece.
 There is no "intrinsic" means of safety, just as there is no worker who, while careful, can
"always" avoid an accident. Therefore, DO NOT underestimate the risks associated with
using the machine and concentrate on the work in progress.
Risks associated with the use of the machine
Although machines like this are not to be considered particularly dangerous, it is important
not to underestimate the risks associated with the use of the machine and concentrate on the
work that is taking place.
Risks associated with the use of the machine
Despite the implementation of all safety devices for safe use of the equipment, it is necessary
to take note of all the accident prevention requirements highlighted in various parts of this
manual.
Risks associated with the use of the machine
Each and every person who is responsible for the use and maintenance of the device should
first have read the instruction manual, particularly the chapter dealing with safety.
It is recommended that the plant safety manager get written confirmation of the above.
Operator’s protective equipment
Before starting any work on the machine, the operator must wear the appropriate personal
protective equipment (PPE) such as gloves and eye protection (see section 6.6 of this
manual).
fervi.com