MACHINES AND
ACCESSORIES
Page 33 of 44
11 MAINTENANCE
11.1Routine maintenance
Remove dust accumulated inside the motor and machining residues on the work surface using
compressed air.
Working with compressed air
Always use protective goggles when undertaking work with compressed air and do not exceed
the pressure of 2 bar.
11.2Lubrication
Check the lubricating oil level is sufficient through the indicator on the right of the head.
Top up the lubricating oil through the hole in the upper part of the head as required.
Figure 23 - Lubricating oil indicator and cap.
Worn power cable
Immediately replace the power cable when you notice that it is worn, cut or damaged.
Every 50 hours or every 5 days
lubricate the gear mechanism and rotating surfaces of the
table and the grooves of the spindle with oil.
Every 300 hours or every 6 months during the life of the machine
, a thorough check of
operation, and wear and tear on the machine is to be carried out by a qualified technician.
Every 600 hours or every year of life
of the machine, adjust the horizontal position of the
table to preserve accuracy.
fervi.com
Summary of Contents for T066
Page 37: ...MACHINES AND ACCESSORIES Page 37 of 44 14 EXPLODED VIEW AND SPARE PARTS f e r v i c o m...
Page 39: ...MACHINES AND ACCESSORIES Page 39 of 44 f e r v i c o m...
Page 42: ...MACHINES AND ACCESSORIES Page 42 of 44 f e r v i c o m...
Page 44: ...MACHINES AND ACCESSORIES Page 44 of 44 15 WIRING PLAN f e r v i c o m...
