Ferroli OMNIA HYBRID C, Installation, Maintenance And User Manual

Page: 70 / 116

70
EN
Cod. 3541T090 - Rev. 00 - 06/2019
BOILER CONTROLLER - SERVICE MENU
0=Disattivato Descrizione Range Default
b12 Modulation delta (b01=1) 0-30°C/10 0°C/10
Priority override - Activation (b01=2) 0-255 minutes 30 minutes
Modulation delta (b01=3) 0-30°C/10 0°C/10
Priority override - Activation (b01=4) 0-255 minutes 30 minutes
b13 Not implemented (b01=1) -- --
Priority override - Deactivation (b01=2) 0-255 minutes 15 minutes
Not implemented (b01=3) -- --
Priority override - Deactivation (b01=4) 0-255 minutes 15 minutes
b14 Pump antiblock operation time 0-20 seconds 5 seconds
b15 Flowmeter type selection (b01=1) 0=Flow. (450 imp/l), 1=Flow. (700 imp/l), 2= Flow. (190 imp/l) 2= Flowmeter (190 imp/l)
No effect on adjustment (b01=2) 0=Flow. (450 imp/l), 1=Flow. (700 imp/l), 2= Flow. (190 imp/l) 2= Flowmeter (190 imp/l)
Flowmeter type selection (b01=3) 0=Flow. (450 imp/l), 1=Flow. (700 imp/l), 2= Flow. (190 imp/l) 2= Flowmeter (190 imp/l)
No effect on adjustment (b01=4) 0=Flow. (450 imp/l), 1=Flow. (700 imp/l), 2= Flow. (190 imp/l) 2= Flowmeter (190 imp/l)
b16 Fan frequency in standby mode 0-100% 0%
b17 Summer/Winter symbol 0 = Disabled, 1 = Enabled 0 = Disabled
b18 DHW mode activation flow rate (b01=1) 0-100L/min/10 25
No effect on adjustment (b01=2) 0-100L/min/10 25
DHW mode activation flow rate (b01=3) 0-100L/min/10 25
No effect on adjustment (b01=4) 0-100L/min/10 25
b19 DHW mode deactivation flow rate (b01=1) 0-100L/min/10 20
No effect on adjustment (b01=2) 0-100L/min/10 20
DHW mode deactivation flow rate (b01=3) 0-100L/min/10 20
No effect on adjustment (b01=4) 0-100L/min/10 20
b20 Flue material selection 0=Standard, 1=PVC, 2=CPVC 0=Standard
b21 PVC flue maximum temperature 60-110°C 88°C
b22 CPVC flue maximum temperature 60-110°C 93°C
b23 Standard flue shutdown maximum temperature 60-110°C 100°C
b24 PVC flue shutdown maximum temperature 60-110°C 93°C
b25 CPVC flue shutdown maximum temperature 60-110°C 98°C
b26 Flow temperature limit in automatic calibration 25°C ÷ 55°C 30°C
b27 Maximum temperature during calibration in DHW mode 75°C ÷ 95°C 80°C
b28 Flowmeter sensitivity factor 0 ÷ 60 (0 = disabled) 20
b29 Restoring Factory Values Change the value from 0 to 10 by pressing the “DHW +” button. Confirm
by pressing the “h” button.
-
P30 Heating ramp 1-20°C/minute 4°C/minute
P31 Virtual setpoint min. temperature (b01=1) 0=Deactivated, 1-80°C 0=Deactivated
Virtual setpoint min. temperature (b01=2) 0=Deactivated, 1-80°C 0=Deactivated
Virtual setpoint min. temperature (b01=3) 0=Deactivated, 1-80°C 0=Deactivated
Virtual setpoint min. temperature (b01=4) 0=Deactivated, 1-80°C 0=Deactivated
P32 Heating standby time 0-10 minutes 4 minutes
P33 Heating Post-Circulation 0-255 minutes 15 minutes
P34 Pump operation 0-3 = Operation strategy 2
P35 Modulating pump min. speed 30-100% 30%
P36 Modulating pump start speed 90-100% 90%
P37 Modulating pump max. speed 90-100% 100%
P38 Pump deactivation temperature during Post-Circulation (b01=1) 0-100°C 50°C
Pump deactivation temperature during Post-Circulation (b01=2) 0-100°C 55°C
Pump deactivation temperature during Post-Circulation (b01=3) 0-100°C 55°C
Pump deactivation temperature during Post-Circulation (b01=4) 0-100°C 55°C
P39 Pump activation hysteresis temperature during Post-Circulation
(b01=1)
0-100°C 10°C
Pump activation hysteresis temperature during Post-Circulation
(b01=2)
0-100°C 25°C
Pump activation hysteresis temperature during Post-Circulation
(b01=3)
0-100°C 25°C
Pump activation hysteresis temperature during Post-Circulation
(b01=4)
0-100°C 25°C
P40 Heating user max. setpoint 20-90°C 80°C
P41 Max. output in heating 0-100% 80%
P42 Burner shutdown in DHW (b01=1) 0=Fixed, 1=Linked to setpoint, 2=Solar 0=Fixed
Legionella protection (b01=2) 0-7=Days of activation (1 = Once every 24 hours / 7= Once every 168
hours)
0=No protection
Burner shutdown in DHW (b01=3) 0=Fixed, 1=Linked to setpoint, 2=Solar 0=Fixed
Legionella protection (b01=4) 0-7=Activation days 0=No protection
P43 Comfort activation temperature (b01=1) 0-50°C 40°C
Storage tank hysteresis (b01=2) 0-60°C 2°C
Comfort activation temperature (b01=3) 0-80°C 40°C
Storage tank hysteresis (b01=4) 0-60°C 2°C
P44 Not used (b01=1) Do not modify 0
Primary setpoint (b01=2) 70-85°C (Primary circuit temperature adjustment in DHW) 80°C
Comfort deactivation hysteresis (b01=3) 0-20°C 20°C
Primary setpoint (b01=4) 70-85°C (Primary circuit temperature adjustment in DHW) 80°C
P45 DHW standby time (b01=1) 30-255 seconds 60 seconds
DHW standby time (b01=2) 30-255 seconds 120 seconds
DHW standby time (b01=3) 30-255 seconds 120 seconds
DHW standby time (b01=4) 30-255 seconds 120 seconds
P46 DHW user max. setpoint (b01=1) 40-70°C 55°C
DHW user max. setpoint (b01=2) 40-70°C 65°C
DHW user max. setpoint (b01=3) 40-70°C 55°C
DHW user max. setpoint (b01=4) 40-70°C 65°C
P47 DHW pump Post-Circulation (b01=1) 0-255 seconds 50 seconds
DHW pump Post-Circulation (b01=2) 0-255 seconds 30 seconds
DHW pump Post-Circulation (b01=3) 0-255 seconds 30 seconds
DHW pump Post-Circulation (b01=4) 0-255 seconds 30 seconds