25
Noise emission values
The noise emission values were measured in
accordance with EN 62841-3-1.
Sound pressure level L
pA
............. 91.1 dB(A)
Uncertainty K
pA
.....................................3 dB
Sound power level L
WA
...............105.3 dB(A)
Uncertainty K
WA
....................................3 dB
Wear ear-muff s.
The impact of noise can cause damage to
hearing.
The stated noise emission values were
measured in accordance with a set of stan-
dardized criteria (EN 62841-1/-3-1) and can
be used to compare one power tool with
another.
The stated noise emission values can also
be used to make an initial assessment of
exposure.
WARNING!
The noise emission levels may vary from the
level specifi ed during actual use, depending
on the way in which the power tool is used,
especially the type of workpiece it is used
for.
For the protection of the operator, safety
measures must be specifi ed which are based
on an estimate of the stress during the actu-
al conditions of use (all stages of the opera-
ting cycle must be considered, e.g. times in
which the electric tools are switched off and
times in which the tool is switched on but
operates without load).
Reduce noise generation and vibration to
a minimum!
•
Use only equipment that is in perfect
condition.
•
Maintain and clean the equipment re-
gularly.
•
Adapt your way of working to the
equipment.
•
Do not overload the equipment.
•
Have the equipment checked if necessa-
ry.
•
Switch off the equipment when not in
use.
•
Wear gloves.
F_TS_2000_1_GB_SPK7.indb 25
F_TS_2000_1_GB_SPK7.indb 25
04.06.2019 10:19:01
04.06.2019 10:19:01
