20
10. Never dismantle the machine‘s safety
devices or render them inoperative.
11. Refi t all guards and safety devices im-
mediately after you have completed any
repairs or maintenance work.
12. Keep the push stick or handle for a push
block at the machine at all times, even
when you are not using them. Slot the
push stick or the push block into its hol-
der when not in use.
13. The sawing of angles/wedges is only
permitted if an appropriate auxiliary
stop (cross stop) is used.
14. Replace the table insert if it is worn –
pull out the power plug –
15. If necessary, wear suitable personal
protection equipment. This could con-
sist of:
a. Ear muff s to prevent the risk of damaging
your hearing;
b. A breathing mask to avoid the risk of in-
haling hazardous dust;
c. Always wear gloves when handling saw
blades and rough materials. Whenever
practicable, saw blades must be carried
in a container;
16. Use only the transport devices to move
the equipment. Never use the guards
for handling or moving the equipment.
17. While you are moving the machine it is
best to cover the top part of the blade,
e.g. with the guard.
18. Give these safety instructions to all per-
sons who work on the machine.
19. Do not use this saw to cut fi re wood.
20. Do not use this saw to cross-cut round-
wood.
21. The machine is equipped with a safety
switch to prevent it from being swit-
ched on again accidentally after a pow-
er failure.
22. If you need to use an extension cable,
make sure its conductor cross-section
is big enough for the saw‘s power con-
sumption. Minimum cross-section: 1.5
mm².
23. If you use a cable reel, the complete
cable must be pulled off the reel.
24. Never load the machine so much that it
cuts out.
25. Always press the workpiece fi rmly
against the saw table.
26. Make sure that off -cuts do not catch on
the saw blade crown. Risk of catapul-
ting!
27. Be sure to observe the safety informa-
tion and operating and maintenance
instructions issued by the manufacturer,
as well as the dimensions listed in the
Technical Data.
28. It is imperative to observe the accident
prevention regulations in force in your
F_TS_2000_1_GB_SPK7.indb 20
F_TS_2000_1_GB_SPK7.indb 20
04.06.2019 10:19:00
04.06.2019 10:19:00
