13
b) Wear personal safety equipment and
always wear safety goggles.
Wearing
personal safety equipment such as dust
masks, non-slip safety shoes, a helmet
or ear muff s, depending on the type
and application of the tool, reduces the
risk of injury.
c) Make sure that the tool cannot start
up accidentally. Ensure that the
power tool is switched off before you
connect it to the power supply and/
or connect the battery pack, pick it
up or carry it.
If you have your fi nger
on the switch while carrying the power
tool or if you connect the power tool to
the power supply while it is switched
on, this may cause accidents.
d) Remove all adjusting tools or wren-
ches before you switch on the power
tool.
Any tool or wrench in a rotating
part of the power tool could cause inju-
ries.
e) Avoid abnormal working postures.
Make sure you stand squarely and
keep your balance at all times.
This
will enable you to control the power
tool better in unexpected situations.
f) Wear suitable clothes. Never wear
loose fi tting clothes or jewelry. Keep
hair and clothing away from moving
parts.
Loose clothing, jewelry or long
hair can be caught by moving parts.
g) If dust extraction devices and dust
collection devices can be fi tted, they
must be connected and must be used
correctly.
The use of a dust extractor
can reduce the dangers posed by dust.
h) Do not allow yourself to be lulled
into a false sense of security and do
not ignore the safety regulations
covering electric power tools, even
if you are familiar with the power
tool after having used it many times.
Carelessness can lead to serious injuries
in just a fraction of a second.
4. Using and handling the power tool
a) Do not overload your power tool. Use
the correct electric tool for the job in
hand.
The correct tool will enable you
to work better and more safely within
the specifi c performance range.
b) Do not use an electric power tool if
the switch is defective.
An electric
power tool that cannot be switched on
or off is dangerous and must be repai-
red.
c) Pull the plug out of the socket and/or
remove the removable battery pack
before making any adjustments to
the tool, changing plug-in tool parts
or putting the power tool down.
The-
F_TS_2000_1_GB_SPK7.indb 13
F_TS_2000_1_GB_SPK7.indb 13
04.06.2019 10:19:00
04.06.2019 10:19:00
