Ferno Venice Basic User And Maintenance Manual Download

Page: 49 / 58

Venice evacuation chair - Venice Clack locking system

Operational description

Venice Clack is a system that allows locking all Venice

evacuation chairs to a wall or inside a suitably equipped

vehicle. Venice Clack consists of a shaped metal support

specifically designed to engage and lock the chair safely

into place.

INSTRUCTIONS FOR USE

Securing the chair in the Locking hook

●

Close and lock the Venice series chair correctly.

●

Use the side telescopic handles to lift the chair, so that

the upper carrying handle reaches the special upper

hooks of Venice Clack.

●

Place the chair correctly, paying the utmost attention

to the track gears.

●

Push the lower part of the chair in its housing until

you hear an audible "clack". Make sure that the chair

is locked.

●

Make sure that the lower locking system is properly

secured.

DESCRIPTION OF THE LOCKING SYSTEM

Summary of Contents for Venice Basic



























































Search results

Summary of Contents for Venice Basic

Reviews:

Related manuals for Venice Basic

Brands by name

Popular brands

Ferno Venice Basic, User And Maintenance Manual

Search results

Summary of Contents for Venice Basic

Reviews:

Related manuals for Venice Basic

Brands by name

Popular brands