Ferno Venice Basic User And Maintenance Manual Download

Page: 26 / 58

Venice Power evacuation chair - Venice Clack locking system

8.3 Control Unit

The chair is fitted with a control unit, located on the

extendible carrying handle. The controls are easily accessible

and identifiable thanks to the up and down symbols, which

ensure a correct usage by the operator.
The control unit has the following controls:

●

Ascent and descent controls

- to control the tracks

movement for ascending or descending stairs, and

are indicated by the "+" and "-" symbol. Specifically,

use the “+” symbol to ascend the stairs and

the “-” symbol to descend. The buttons on the right

side of the controller can be adjusted depending on the

amount of pressure exerted by the user. The controls on

the left side have no speed control function, so when

the button is pressed the chair reaches its maximum

speed, depending on whether “hare” or “tortoise”

mode is selected.

●

Brake Button

- to enable or disable the brake function.

The brake function is always enabled by default.

●

Lights Button

- switches the lights on and off.

●

Speed selection button

- allows to select the maximum

speed required.

●

Main battery indicator

- shows the charge status of

the 28V battery housed in the motor unit.

●

Controller battery indicator

- shows the charge

status of the controller batteries. If the indicator light

switches on, fit two new 1.5V AA batteries.

●

Connection problems indicator

- lights up when no

connection has been established between the controller

and the motor unit.

Control unit guide

Hare

mode

Connection

problem

indicator

Speed

selection

button

Main

battery

indicator

Brake

activation

button

Controller

batteries

indicator

Lights

button

Summary of Contents for Venice Basic



























































Search results

Summary of Contents for Venice Basic

Reviews:

Related manuals for Venice Basic

Brands by name

Popular brands

Ferno Venice Basic, User And Maintenance Manual

Search results

Summary of Contents for Venice Basic

Reviews:

Related manuals for Venice Basic

Brands by name

Popular brands