Ferno Venice Basic User And Maintenance Manual Download

Page: 32 / 58

Venice Power evacuation chair - Venice Clack locking system

8.13 Battery charger

The Milwaukee battery and charger instructions replace

those provided in this manual. For additional information,

refer to the manuals of these components.

The chair is supplied with a battery charger.

●

220-240 VAC, 50/60 Hz (Europe)

Charging Time: approx. 1 hour. If the battery is completely

discharged, the charging time may be longer. The charging

time can vary based on the frequency of charging, the charge

level of the battery and the battery's age.
Store the charger ONLY in a cool, dry environment. DO

NOT store in environments with temperatures above 50°C.

INDICATOR LIGHTS

The charger has two lights (red and green), indicating:

●

RED (steady):

the battery is connected and charging.

●

GREEN (steady):

charging completed.

●

RED (flashing):

Overheating. Recharge the battery only

when the temperature range is between 0°C and 65°C.

●

RED/GREEN (alternating flashing):

the battery is

damaged or not functioning correctly. Replace the

battery immediately.

CHARGING THE BATTERY

Fitting and charging the battery:

Align the battery slots

with the special supports on the battery charger. Insert the

battery into the support until you hear an audible click. Make

sure the battery is securely attached and that the indicator

light on the charger turns on.

Removing the battery:

Fully press both red buttons marked

PRESS (both left and right buttons), and extract the battery.

Important

The battery capacity can be affected by the conditions

in which it is stored, such as storage for long periods

in environments with temperatures below -17°C or

above 66°C.

Battery charger

Indicator lights

Battery connectors

Summary of Contents for Venice Basic



























































Search results

Summary of Contents for Venice Basic

Reviews:

Related manuals for Venice Basic

Brands by name

Popular brands

Ferno Venice Basic, User And Maintenance Manual

Search results

Summary of Contents for Venice Basic

Reviews:

Related manuals for Venice Basic

Brands by name

Popular brands