Ferno Venice Basic User And Maintenance Manual Download | Manualshive

Page: 45 / 58

background image

45

© Ferno Washington Italia. Rel.15012020

Venice evacuation chair - Venice Clack locking system

10.9 Removing and fitting the ABS panels

The ABS panels on the backrest and the seat can be removed

and re-fitted on the chair.

BACKREST PANEL

Removing the backrest panel:

Gently pull one of the lower

borders of the backrest downwards and separate it from the

chair (Figure 7). Repeat the operation on the opposite side.

Then slide the panel upwards past the two retainers on the

upper side of the frame (Figure 8).

Fitting the backrest panel:

Position the panel with the

horizontal restraint openings up. Slide the two upper holes

on the retainers, then push both lower borders of the panel

on the frame sides until they click on the retainers.

SEAT PANEL

Removing the seat panel:

Pull both front borders of the

panel upwards to separate the seat from the frame (Figure 9),

then remove the panel completely from the chair.

Fitting the seat panel:

Align the panel with the chair frame

and push it downwards until it fits into place.

Figure 7 - Backrest panel

Figure 8 - Backrest panel retainers

Figure 9 - Seat panel

Panel retainers

«
...
43
44
45
46
47
...
»

Summary of Contents for Venice Basic



























































Reviews:

No comments

Related manuals for Venice Basic

Brand: Garaventa Lift Pages: 7

Brand: Mobiak Pages: 18

Eclipse Manual Tilt Wheelchair

Brand: PDG Mobility Pages: 14

ADI Q-Back 2.0 AFT Series

Brand: Stealth Products Pages: 20

M2 Standard 310027

Brand: HMN Pages: 12

Brand: Karisma Pages: 20

Brand: Pride Pages: 39

Brand: EZee Life Pages: 6

Brand: Vermeiren Pages: 176

Brand: You-Q Pages: 57

Brand: Handicare Pages: 24

Brand: Karma Pages: 48

Brand: Karma Pages: 52

Brand: Quickie Pages: 80

Brand: Quickie Pages: 26

Brand: R82 Pages: 6

Lille Viking 2000+

Brand: Etac Pages: 60

Brand: Quickie Pages: 32

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands