Ferno Venice Basic User And Maintenance Manual Download

Page: 47 / 58

Venice evacuation chair - Venice Clack locking system

11 - VENICE CLACK LOCKING SYSTEM

Warning

The danger symbols draw attention to potentially dangerous

situations that, if disregarded, may result in accidents,

damage and/or injury.

WARNING

Untrained users may injure themselves, cause

damage and / or injury. Only allow trained personnel

to operate the Venice Clack locking system.

________________________________________

Improper use of Venice Clack may cause damage

and / or injury. Use the Venice Clack locking system

as described in this manual.

________________________________________

Any unauthorised modification of Venice Clack

could cause serious damage, injury and / or

unforeseeable problems. Do not modify or alter

Venice Clack in any way.

_____________________________________

Any damage to the components of the Venice Clack

locking system and / or the entire system may affect

its performance and safety. Inspect Venice Clack

frequently, especially before and after each use.

Place the device out of service if it shows signs of

wear or damage.

________________________________________

Venice Clack is not designed to lock the chair with

the patient seated in it. It is recommended to close

the chair before securing it to Venice Clack.

WARNING

Any use of Venice Clack other than that described in

this manual may cause damage, serious accidents

and / or injuries to personnel.

________________________________________

Occasional and untrained assistants may damage

the Venice Clack locking system. Take the utmost

care when using Venice Clack.

________________________________________

Do not allow occasional untrained assistants to carry

out preparatory manoeuvres with any chair of the

Venice series and the Venice Clack locking system,

or perform operations without the supervision of

trained professionals.

________________________________________

Using Venice Clack with devices / instruments not

approved or authorised by Ferno s.r.l. may result

in damage,serious accidents, and / or injury to

personnel.

________________________________________

Unauthorised repairs carried out by technicians or

workshops not authorised by Ferno s.r.l. will void

all warranties and may make any type of operation

with Venice Clack dangerous.

Summary of Contents for Venice Basic



























































Search results

Summary of Contents for Venice Basic

Reviews:

Related manuals for Venice Basic

Brands by name

Popular brands

Ferno Venice Basic, User And Maintenance Manual

Search results

Summary of Contents for Venice Basic

Reviews:

Related manuals for Venice Basic

Brands by name

Popular brands