Ferno Ultra Care 4000, User Manual, Page: 7 / 23

© Ferno-Washington, Inc. 234-2117-01 May 2003
7
Ultra Care 4000 ™ Assembly & Disassembly
4 - LIFT ASSEMBLY AND DISASSEMBLY
Figure 1 - Lift Disassembled
4.1 Assembling the Lift
Follow the instructions in this section to assemble the
three main elements of the lift: the base, mast, and
spreader-bar assembly (Figure 1).
EXTENDING AND LOCKING THE LEGS
1. Remove the quick-release pin from the center of
each leg (Figure 2).
2. Unfold one leg at a time and pivot it to its
extended position.
3. Replace the quick-release pins to lock the legs in
the extended position (Figure 2).
Note: If the legs are misaligned, the quick-release pins
will be difficult to insert or remove. Move the leg slightly
to insert or remove the pin.
Important
Use, assemble and disassemble the lift only
with both legs locked in the extended position.
Using the lift without extending
and locking
the legs could cause the lift to tip.
Base
Mast and
Lift Boom
Spreader-Bar Assembly
Figure 2 - Extending the Legs
Quick-Release Pins
Leg Folded
Leg Extended