Ferno Ultra Care 4000 User Manual Download Page 2

2

© Ferno-Washington, Inc.   234-2117-01   May 2003

Ultra Care 4000

Disclaimer

This manual contains general instructions for the use, operation and
care of this product. The instructions are not all-inclusive. Safe and
proper use of this product is solely at the discretion of the user. Safety
information is included as a service to the user. All other safety
measures taken by the user should be within and under consideration
of applicable regulations. It is recommended that training on the proper
use of this product be provided before using this product in an actual
situation.

Retain this manual for future reference. Include it with the product in
the event of transfer to new users. Additional free copies are available
upon request from Customer Relations.

Proprietary Notice

The information disclosed in this manual is the property of Ferno-
Washington, Inc., Wilmington, Ohio, USA. Ferno-Washington, Inc.
reserves all patent rights, proprietary design rights, manufacturing
rights, reproduction use rights, and sales use rights thereto, and to any
article disclosed therein except to the extent those rights are expressly
granted to others or where not applicable to vendor proprietary parts.

Ferno-Washington, Inc.

70 Weil Way

Wilmington, OH 45177-9371

U.S.A.

© Copyright Ferno-Washington, Inc. All Rights Reserved.

Telephone (U.S.A. and Canada) ....... 1.800.733.3766
Telephone (Worldwide) ................. +1.937.382.1451
Fax (United States) ........................... 1.937.382.1191
Fax (Outside U.S.A.) ....................  +1.937.382.6569
Internet ............................................. www.ferno.com

EuropEan rEprEsEntativE

Ferno (UK) Limited, Stubs Beck Lane, Cleckheaton

West Yorkshire BD19 4TZ, United Kingdom

Telephone 

+44 (0) 1274 851999

Fax 

+44 (0) 1274 851111

Internet 

www.ferno.co.uk

234-3468-00

Summary of Contents for Ultra Care 4000
























Reviews: