manualshive.com logo in svg

Ferno 21-00034, User And Maintenance Manual, Page: 6 / 40

Share
Download
Ferno 21-00034 User And Maintenance Manual Download Page 6

6

Tirol Kit

© Ferno s.r.l. Rel.30092022 ENG

2

1.6 Glossary of symbols

The symbols used in this manual and / or on the labels are defined below. The CE mark is present on the stretcher, accessories 

and in this manual.

 

496 lb

225 kg

Read the user manual 

carefully

Date and country of 

manufacture

The stretcher requires 

at least two qualified 

operators for correct use

Do not wash with high 

pressure water

Load capacity

(in kilograms, pounds, 

and stones)

The product meets 

European Union 

Standards

Medical Device

Manufacturer

1.5 Compatible basket stretchers

The manual describes the basket stretchers intended to be 

used with the Tirol Kit. You can find them listed below: 

For detailed information refer to the product information or 

contact your local distributor.

Basket stretchers

REF (Item / Catalog)

Item Description

11-0100A

Titan Tapered SS

11-0101A

Titan Regular SS

11-0115SL

Titan-Ti Split Regular

11-0116SL

Titan-Ti Regular Titanium

11-0118SL

Titan-Ti Tapered Titanium

11-0119SL   

Titan-Ti Tapered Split

11-0119TIROL Titan-Ti Tapered Split with welded 

plates

 

WARNING

The accessories described have been tested and 

validated for use with the listed basket stretchers.

Ferno s.rl. does not take any responsibility or 

liability when accessories other than those listed 

are used.

A part number (often 

abbreviated PN, P/N, 

part no., or part #) 

unambiguously identifies 

a particular design part.

A catalogue number 

indicates the 

manufacturer’s catalogue 

number so that the 

medical device can be 

identified.

A serial number indicates 

the manufacturer’s serial 

number so that a specific 

medical device can be 

identified.

A batch code indicates the 

manufacturer’s batch code 

so that the batch or lot 

can be identified.

 

Summary of Contents for 21-00034









































Reviews:

No comments