manualshive.com logo in svg

Ferno 21-00034, User And Maintenance Manual, Page: 24 / 40

Share
Download
Ferno 21-00034 User And Maintenance Manual Download Page 24

24

Tirol Kit

© Ferno s.r.l. Rel.30092022 ENG

4.4.2 One operator mounting procedure

MOUNTING THE V-SHAPED WHEEL SUPPORTS

After mounting the handle adjustment shafts on the 

stretcher, place the stretcher upside down on the ground.
Take the two V-shaped wheel supports and, following 

the color coded labels, apply them on the upper tube in 

between the colored stripes. 
To attach the V- shaped wheel supports you only need to 

SUHVV¿UPO\WKHTXLFNUHOHDVHHQGVDJDLQVWWKHXSSHUWXEH

of the stretcher. 

Check that the V- shaped wheel supports are correctly 

engaged and can turn around the tube smoothly.

Repeat this procedure on both sides of the stretcher.

MOUNTING THE TRANSPORT WHEEL

1. Once the V- shaped wheel supports have been mounted 

and checked, put together the wheel forks of  the V- 

shaped wheel supports 
2. Fit the wheel between the wheel forks and insert the 

wheel locking pin making sure that it can turn and is 

positioned on the right side 

3. Tightly screw the wheel locking pin and close the red 

locking lever into place.

Summary of Contents for 21-00034









































Reviews:

No comments