23
Tirol Kit
© Ferno s.r.l. Rel.30092022 ENG.
Check that the V- shaped wheel supports are correctly
engaged and can turn around the tube smoothly.
Repeat this procedure on both sides of the stretcher.
MOUNTING THE TRANSPORT WHEEL
1. Once the V- shaped wheel supports have been mounted
and checked, an operator can lift the stretcher with or
without the aid of the carrying handles to facilitate
assembly.
2. Pass the V- shaped wheel supports underneath the
stretcher
3. Fit the wheel between the wheel forks of the V- shaped
wheel supports and insert the wheel locking pin making
sure that it can turn and is positioned on the right side.
4. Tightly screw the wheel locking pin and close the red
locking lever into place.
NOTE:
if the lever can’t be completely closed, slightly
loosen the wheel locking pin until it can be correctly fixed.
DISMANTLING THE WHEEL
- Remove the pin.
- Remove the wheel.
- Disengage the locking system by holding down the red
triangular button under the locking system.
- Remove the V-shaped wheel support from the upper
tube.