27
Tirol Kit
© Ferno s.r.l. Rel.30092022 ENG.
CPR / parking position for patient management: It
is possible to set the handles in the support position
to convert the stretcher into a work and management
platform. In order to do so it is necessary to remove the
wheel and the V-shaped wheel forks, and to install the
handles so that the the yellow line (the one without the
dot) is alligned with the toothed shaft’s upper marking
(yellow line in case the shaft is mounted at the inside
or red line in case it is mounted on the outside of the
stretcher).
4.6 Shoulder support transport
harnesses
After mounting the handles: it is possible to put on a set
of dedicated straps for handling loads.
The Shoulders Supports consist of an harness that has a
loop, at each of the two ends, detachable by means of a
cobra buckle.
To secure the Shoulders Supports to the handles:
- Wear the harness like a backpack
red button and pulling it outwards.
- Detach one end at a time by opening the cobra buckle
3DVVWKHKDUQHVV¶H[WUHPLW\LQVLGHWKHKDQGOHDQGZUDS
it around the tube passing the cobra buckle inside the
harness’ loop and making sure that the knot is made in
such a way to remain at the upper outermost corner of the
handle with one loop on the horizontal tube and the other
on the vertical one