20
Tirol Kit
© Ferno s.r.l. Rel.30092022 ENG
Important
Shouldn’t the Tirol Kit Adapter plate assembly
adhere firmly to the tubes of the stretcher even after
completely loosing the adjustment screws, slightly
loosen the whole assembly in order to return to point
5. Before moving on with points 6-12, insert one shim
(or two if necessary), between the plates assemply and
the stretcher’s uppermost tube, before fastening the
assembly again in place.
18. Repeat the procedure at the foot end using the “B” plates
.
4.2.2 Tirol Kit Adapter for REGULAR basket
stretchers
Components
Head end:
1 “A”top plates
1 “A”bottom plates
1 “A” Striker plates
2 1mm-thick shims for Tirol Kit Adapter plates
2 UNI 5931 A4/80 M5x25 Hexagon socket head cap screws
2 UNI 59531 A4/80 M8x50 Hexagon socket head cap
screws
4 ISO 10642 A4/70 M6x16 Hexagon socket countersunk
head cap screws
Foot end:
1 “A”top plates
1 “A”bottom plates
1 “A” Striker plates
2 1mm-thick shims for Tirol Kit Adapter plates
2 UNI 5931 A4/80 M5x25 Hexagon socket head cap screws
2 UNI 59531 A4/80 M8x50 Hexagon socket head cap
screws
4 ISO 10642 A4/70 M6x16 Hexagon socket countersunk
head cap screws
Necessary equipment
1 4 mm Allen wrench
1 6 mm Allen wrench
1 Loctite (threadlocker)
Instructions
Follow the same instructions as for the tapered basket
stretcher applying 2 “A” Adapter plates instead of 1 “A” plate
and 1 “B” plate.
4.3 Setup of the Tirol Kit Handle
Adjustment Shafts
4.3.1 Handle Adjustment Shafts installation
on a Titan-Ti basket stretcher with welded
plates
Necessary equipment
2 Tirol Kit Handle Adjustment Shafts
8 VTBTXM8X16A2 screws
8 VTBTXM8X20A2 screws
16 RPIM8X16A2 washer
1 Loctite (threadlocker)