manualshive.com logo in svg

Ferno 21-00034, User And Maintenance Manual, Page: 5 / 40

Share
Download
Ferno 21-00034 User And Maintenance Manual Download Page 5

5

Tirol Kit

© Ferno s.r.l. Rel.30092022 ENG.

1. SAFETY INFORMATION

1.1 Warning

Danger signs draw attention to potential dangerous 

situations that, if ignored, may result in accidents, damage 

and/or injury.

 

WARNING

 

Untrained users may injure themselves and/or 

cause damage and/or physical harm. Use of the 

device must be entrusted to trained and qualified 

personnel only. 

 

Incorrect use of the device can result in damage 

and/or injury. Use the device as instructed in this 

manual. 

 

Casual assistants can cause damage and/or  

physical harm or injure themselves. Always 

maintain control of the device and monitor and 

coordinate the assistants. 

 

An unassisted patient is at the risk of injury. Never 

leave the patient alone and always assist the 

patient during use of the device. 

 

Incorrect attachment of the straps can cause 

displacement of the patient, resulting in injury 

and/or damage. The straps should be wrapped 

around the frame of the device.  

 

A failure to use the straps can cause the patient 

to fall and endanger their safety. Always use the 

straps to secure the patient. 

 

Improper maintenance can cause serious 

accidents, injuries and/or damage. Perform 

maintenance as instructed in this user manual.  

 

The use of improper and unauthorized devices can 

cause accidents, damage and/or injury. Use only 

devices that have been approved and authorised 

by Ferno s.r.l..  

 

Unauthorized repairs and repairs carried out by 

people not approved by Ferno S.r.l. will render all 

warranties null and void and could compromise 

the safety of the device.

1.2 Important

The boxes labeled "Important" contain important

information on use and/or maintenance of the device.

1.4 Load Capacity

Important

1.3 Blood-borne diseases

To reduce the risk of exposure to infectious diseases that 

may be transmitted by blood, such as HIV-1 or hepatitis, 

carefully follow the local health protocols. You can check the 

cleaning and disindection procedures suggested by Ferno in 

“Maintenance” section.

Load capacity

 

496 lb

225 kg

 

WARNING

 

Non-original spare parts and inadequate repairs 

may cause damage and/or injury. Use only 

original parts by Ferno and contact only Ferno 

S.r.l.'s Customer Support. 

Summary of Contents for 21-00034









































Reviews:

No comments