Ferm OTM1012, Original Instructions Manual

Page: 7 / 36

7
EN
safety shoes, etc. Risk of personal injury.
• Keep bystanders away from the work area.
Make sure that all persons in the work area
wear protective equipment. Risk of personal
injury.
• Keep the mains cable away from the rotating
accessory. If the mains cable touches the
rotating accessory, your hands or arms may
come in contact with the accessory. Risk of
personal injury.
• Hold the machine by the insulated gripping
surfaces where the accessory may contact
hidden wiring or the mains cable. If the
accessory contacts a ‘live’ wire, the exposed
metal parts of the machine can also become
‘live’. Risk of electric shock.
• Do not use the machine while carrying it at
your side. Risk of personal injury.
• Do not use the machine near flammable
materials. Risk of fire.
• Beware that the accessory continues to
rotate for a short period after switching off
the machine. Do not attempt to bring the
accessory to a standstill yourself.
• Never put the machine down on a table or a
workbench before it has been switched off.
• Regularly clean the ventilation slots. Risk of
electric shock.
2. MACHINE INFORMATION
Intended use
Your multitool has been designed for light
sanding, sawing and scraping applications.
Technical specifications
Model No. OTM1012
Voltage 20 V
No-load speed 19000 /min
Weight 0.96 kg
Sound pressure (Lpa) 84.6 dB(A)
Acoustic power (Lwa) 95.6 dB(A)
Uncertainty (K) 3 dB(A)
Vibration (sawing in steel) 16.22 m/s²
Uncertainty (K) 1.5 m/s²
Wear hearing protection.
Only use the following batteries of the FX-POWER
20V battery platform. Using any other batteries
could cause serious injury or damage the tool.
CDA1167 20V, 2Ah Lithium-Ion
CDA1168 20V, 4Ah Lithium-Ion
The following charger of the can be used to
charge these batteries.
CDA1168 Charger adapter
CDA1170 Quick charger
The batteries of the FX-POWER 20V battery
platform are interchangeable with all the FERM
FX-POWER battery platform tools.
Vibration level
The vibration emission level stated in this
instruction manual has been measured in
accordance with a standardised test given in
EN 62841; it may be used to compare one tool
with another and as a preliminary assessment of
exposure to vibration when using the tool for the
applications mentioned:
- using the tool for different applications, or with
different or poorly maintainted accessories,
may significantly increase the exposure level
- the times when the tool is switched off or when
it is running but not actually doing the job, may
significantly reduce the exposure level.
Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
your hands warm, and organizing your work
patterns.
Description
The numbers in the text refer to the diagrams on
page 2-3.
1. On/off switch
2. Mounting point for accessories
3. Grip
4. Quick change lever
5. Battery (not included)
6. Battery unlock button
7. Dust extraction adapter
8. Sanding pad