FENIX IMVICO
TK-41 OPERATION MANUAL
9/88
1 – GENERAL SPECIFICATIONS
1.1-PRINTING SPECIFICATIONS
1) Printing method:
Thermal line printing.
2) Print Head:
Total number of dots:
Printing mechanism model type
Number of dots
M-522AF (59.5mm paper-width model)
448 dots (= 56mm)
M-532AF (79.5mm paper-width model)
576 dots (= 72mm)
M-542AF (82.5mm paper-width model)
640 dots (= 80mm)
Printing width:
Printing mechanism model type
Maximum printing width
M-522AF (59.5mm paper-width model)
56mm (448-dot positions)
M-532AF (79.5mm paper-width model)
72mm (576-dot positions)
M-542AF (82.5mm paper-width model)
80mm (640-dot positions)
3) Dot density:
203 dpi x 203 dpi (dpi: dots per inch (25.4mm)).
(8
dots/mm)
4) Printing speed:
High speed mode:
150mm/s (5,9”/s) max.
Normal mode:
100mm/s (3,9”/s)
Low speed mode:
80mm/s (3,1”/s)
Very low speed mode:
50mm/s (2”/s)
Printing speed may be slower, depending on the
data transmission speed and combination of control
commands, environmental conditions, or selection of
the print density.
5) Paper feeding:
Feeding method:
unidirectional with friction feed.
Feeding pitch:
0,125mm (0,0049”)
Feeding speed:
150mm/s (5,9”/s) maximum.
1.2- CHARACTER SPECIFICATIONS
1) Number of characters:
Alphanumeric characters: 95
(Refer to point
3.2- CHARACTER CODE TABLE
).
2) Character structure:
Font A: 12 x 24 dots (1,5 x 3 mm).
Font B: 8 x 16 dots (1 x 2 mm).
Font B is selected as the default.
