FENIX IMVICO
TK-41 OPERATION MANUAL
75/88
____________________________________________________________________
APPENDIX B – RECOVERY FROM AUTOCUTTER ERROR
____________________________________________________________________
•
If a foreign object, such as a push pin or paper clip, drops in the autocutter
and causes the autocutter to lock up, the printer enters an error state and
begins the recovery operation automatically.
If the problem is not serious, the autocutter returns to its normal position
without any intervention by the user.
If the autocutter does not return to its normal position by itself, manually
rotate the cutter motor gear to return the cutter to its original position (see
figure
B.1
).
•
If you cannot rotate the motor gear, rotate it in the reverse direction to loosen
it; then press the paper feed button. Open the platen unit, remove the
jammed paper, and reinstall the paper roll. Then close the platen unit..
Figure B.1-
Printer mechanism. Front view.
Manual access to
the motor gear
