FENIX IMVICO
TK-41 OPERATION MANUAL
62/88
ESC c 4 n
[Name]
Select paper-near-end sensor to stop printing
[Format]
ASCII
ESC c 4
n
Hex
1B 63 34
n
Decimal
27 99 52
n
[Range]
0
≤
n
≤
255
[Description] Selects the paper-near-end sensor to stop printing when a paper-near-
end is detected, using
n
as follows:
Bit
OFF / ON
Hex
Decimal Function
0
OFF
00
0
Undefined.
OFF
00
0
Paper roll near-end sensor disabled.
1
ON
02
2
Paper roll near-end sensor enabled.
2-7
-
-
-
Undefined.
[Notes]
•
When a paper sensor is enabled with this command (n = 2), printing is
stopped.
[Default]
n
= 0
ESC d n
[Name]
Print and feed
n
lines
[Format]
ASCII
ESC d
n
Hex
1B 64
n
[Range]
<00>H
≤
n
≤
<FF>H
[Description] Prints the data in the print buffer and feeds
n
character lines.
[Notes]
•
This command sets the print starting position to the beginning of the line.
•
This command does not affect the line spacing set by
ESC 2
or
ESC 3
.
•
The maximum paper feed amount is 1016 mm {40”}. If the paper feed
amount
(n x
line spacing) of more than 1016 mm {40”} is specified, the
printer feeds the paper only 1016 mm {40”}.
•
Every line feed corresponds to the current selected font height (24 dots for
Font A and 16 dots for Font B).
[Reference]
ESC 2, ESC 3.
GS FF
[Name]
Feed marked paper to print starting position
[Format]
ASCII
GS FF
Hex
1D 0C
[Description] Feeds the marked paper to the print starting position.
[Notes]
•
This command is enabled only when the Optical Mark sensor is set to be
effective using PROGRAMMING MODE.
•
This command sets the next print position to the beginning of the line.
•
Even if this command is executed at the print starting position of the marked
paper, the printer does not feed the marked paper to the next print starting
position.
[Reference]
GS ( F
