TST
Assembly instructions
FUF2 / FU3F-A/-C/-F
FEIG ELECTRONIC GmbH
Page 43 of 114
TST_FUxF-A-C-F_Montageanleitung_EN_15
5.4 Safety edge at the 2nd integrated evaluation (input 10)
This input is preset as digital input. Various types of safety edges can be connected, for example:
•
Electrical safety edge with 1.2 kΩ or 8.2 kΩ terminating resistor.
•
Dynamical optical system
Use of additional types of safety edges is possible. Please contact the door manufacturer in this
respect.
5.4.1
Connect the optical safety edge at input 10
61
62
63
64
65
66
Spiral cable
Junction
box
brown
white
Receiver
Transmitter
green
Figure 17: Connection of an optical safety edge
In order to use an optical safety edge on input 10, the function of this input must first be
determined. For this purpose, parameters P.50A is used. For the setting, refer to the
parameter list in chapter input profiles.
Typically, this input is used as safety input during opening movement. For this example,
parameter P.50A = 1406 is set.
Then the edge type of parameter P.5A2 must be set = 4.
It is important to first set parameter P.50A and then only parameter P.5A2.
