OBID i-scan
®
System-Manual
ID ISC.MR/PR/PRH100/101-A
FEIG ELECTRONIC GmbH
Page 56 of 118
H01000-5e-ID-B.doc
6.1.3. [0x22] Lock Multiple Blocks
This command locks one or more data blocks.
The supported ISO15693Host commands depends on the different ISO15693 Transponder types,
they are described in chapter
9.1. Supported ISO15693 Host commands for ISO15693 Transponders
.
Note:
This command is only available for ISO15693 Transponders and Tag-it HF.
REQUEST-DATA
4
5
(6...13)
6 / (14)
7 / (15)
0x22
MODE
UID
DB-ADR
DB-N
RESPONSE-DATA (STATUS = 0x03)
5
DB-ADR-E
RESPONSE-DATA (STATUS = 0x95)
5
6
ISO15693
ERROR
DB-ADR-E
MODE:
Bit:
7
6
5
4
3
2
1
0
Function
0
0
0
0
0
ADR
ADR:
b000
non-addressed
b001
addressed
b010
selected
UID:
Read only serial number of the Transponder. The UID is required only in the addressed mode.
DB-ADR:
First block number to be locked. First block can be any value between 0 and 255.
DB-N:
Number of data blocks to be locked, starting at DB-ADR. The maximum number of DB-N, de-
pends on DB-Size. The maximum number of bytes is 128 byte.
DB-Size
Max. DB-N
4
0x20 ->32
8
0x10 ->16
x
= 128 / x
ISO15693 ERROR:
ISO15693 ERROR code of Transponder response. This byte is only available if STATUS = 0x95.
DB-ADR-E:
Block number where the error occurred.