OBID
i-scan
®
HF
Installation
LRM2500
FEIG ELECTRONIC GmbH
Seite 39 von 69
M00910-8e-ID-B-ANATEL.doc
Step
Action
Note
6
Activate antenna 2 with
command: „Function Unit
Commands - Multiplexer“
Parameter:
„Channel Select“
„Cascade Level = 1“
„Output Channel of Input 1
= 2“
7
Confirm with “Send”
8
Repeat Step 3 to 5 for
every further antenna
If the values are not proper, check the following:
•
Are all cables pulled tight and will contact well?
•
Are the ring cores installed in the antenna cable?
•
Are the cables routed as specified?
•
Are other RFID systems installed closed by?
•
Are there large metal parts close to the antenna (distance < 1.0 m)?
•
Are there devices nearby which may emit noise interferences (larger machines or wireless
devices)?
•
Are there interferences from the mains?
To determine which devices may be disturbing the gate, briefly disconnect them from the mains.
