Feider Machines FBAE200, Instruction Manual

Page: 14 / 24

OPERATION
Snow

Snow is removed more easily when it is still fresh. Pass back over the already cleared zones to remove snow
residue.

If possible, clear the snow in the direction of the wind. Check the distance and the direction of the removed
snow.

Reduce the engine rotations before stopping it.
Dirt & Gravel

To reduce the amount of duct lifted when sweeping, work at low brush speed. If possible, also work on damp
or cloudy days or after it rains.

For gravel, adjust the height of the brush to avoid throwing them and causing potential damages.
Heavy Debris

Reduce forward speed and work without using the entire machine working width.
WARNING
SAFELY OPERATE EQUIPMENT
Do not operate equipment until you are completely trained by a qualified operator in how to use the controls, know
its capabilities, dimensions, and all safety requirements.

Keep all step plates; grab bars, pedals, and controls free of dirt, grease, debris, and oil.

Never allow anyone to be around the equipment when it is operating.

Do not allow riders on the attachment or the prime mover.

Do not operate the equipment from anywhere other than the correct operators position.

Never leave equipment unattended with the engine running or with this attachment in a raise position.

Do not alter or remove any safety feature from the prime mover or this attachment.

Know your work site safety rules as well as traffic rules and flow. When in doubt on any safety issue, contact
your supervisor or safety coordinator for an explanation.
WARNING
IN AN EMERGENCY, RELEASE LEVERS AS QUICKLY AS POSSIBLE AND STOP THE ENGINE.
14