2. Handle assembly
The handle is delivered with the dashboard
already assembled. The machine handle
assembly screws, gear control fastening
screws and nuts and bolts to secure the brush
directional control are delivered in a separate
package found in the machine packaging.
Install as follows:
a) Bring the two tubes at the ends of the
handle (fig. 4.A) up to the support (fig. 4.B).
b)
Insert the screws in the holes and secure in
place with the nuts.
3. Installation of the gear control
a) Remove the previously assembled articulated joint (fig. 5.A) on the washer gear
control (fig. 5.B) and nut (fig. 5.C).
b) Insert the articulated joint (fig. 5.A) of the gear control in the hole on the lever (fig.
5.D) to connect it to the transmission.
c) Secure the washer (fig. 5.B) and nut (fig. 5.C).
4. Brush directional control assembly
a) Remove the previously assembled articulated joint (fig. 6.A) on the brush directional
control nut (fig. 6.B).
09
Summary of Contents for FBAE200
Page 16: ...16 ...
