Feider Machines FBAE200, Instruction Manual

Page: 18 / 24

SERVICE & REPAIR - GENERAL

Repair or adjust the sweeper in a safe area, away from traffic and other hazards.

Before adjusting or servicing remove spark plug wire from spark plug.
STORAGE
NOTICE:

Do not store the sweeper with weight on the brush. Weight will deform the bristles, destroying the sweeping
effectiveness.

Do not store polypropylene brushes in direct sunlight. The material can deteriorate and crumble before the
bristles are worn out.

Keep polypropylene brush material away from intense heat or flame.
TROUBLESHOOTING
The engine does not start
Ensure that the spark plug is not defective
Ensure that the spark plug cap is fitted correctly
The engine runs irregularly
Ensure that the choke is deactivated
Ensure that there are no impurities in the fuel
The brushes will not rotate
Check whether the belt coupling is adjusted correctly.
Check whether the v-belt is defective
The machine will not run Make sure that the belt coupling is adjusted correctly
The machine does not sweep
effectively
Check whether the v-belt is defective
Check whether the brush distance to the surface is set
correctly
18