Feider Machines FBAE200, Instruction Manual

Page: 13 / 24


The terms swing and angle are used interchangeably.
Brush Direction
The brush direction is regulated by a lever (fig. 9B) that tilts it in the required direction. Move the lever
forward or rear in one of the 3 available positions to tilt the brush.
·
Lever forward = 15
o
to the right.
·
Lever central = 0 o no tilt.
·
Lever rear = 15
o
to the left.
Sweeping
To sweep:
1. Turn the handle(fig.9A) to control Forward and Rear.
2. Turn the brush directional control (fig. 9 B) to the required
position. (See Brush Direction)
3. Set the gear depending on the route and the amount of
material to be swept.
4. Engage the brush drive. (fig. 9C)
5. Engage the traction drive. (fig. 9D)
NOTICE : AVOID SWEEPER DAMAGE. Reduce travel speed to
avoid hitting immovable objects.
The sweeper is equipped with an instant shutoff, when you release the levers, the brush and machine stop.
Operating Tips
NOTICE : AVOID SWEEPER DAMAGE. Do not ram into piles.
Large areas

For uneven or dirt surfaces, reduce speed to avoid jogging the brush and damaging it.

Sweep creating a central passage dividing the area in 2 parts and then sweeping the remaining areas. This
reduces the load on the brush.
13