Federal Signal Corporation Personnel Alerting System, Installation And Operation Instructions Manual

Page: 18 / 84

Federal Signal UltraVoice
Installation and Operation Manual
GENERAL DESCRIPTION
18
Unit Type
The Unit Type is set to the type of siren this unit is controlling, and is usually determined
by the number of cells in the speaker array. When setting up the unit type, the user
selects from a menu with the following choices:
UV1 1 - UV400 Amplifier, 400 Watts total power
UV2 2 - UV400 Amplifiers, 800 Watts total power
Unit Address
Address Switch
The Unit Address is a three-digit number with a range of 001-255. The unit address is
set via dipswitch S1. S1 Off position indicates active position. Add binary active switch
positions to get ID address.
Switch
number 1 2 3 4 5 6 7 8
Binary
number 1 2 4 8 16 32 64 128
Example: Switch number 1, 2 & 3 is binary number 1, 2 & 4, which when added, would
equal unit address 7.
Programming details are in the software manual. The ID address is stored at power up
of the controller. If the ID address is changed, the power (battery and AC) must be
turned off and then on.