Federal Signal Corporation Personnel Alerting System, Installation And Operation Instructions Manual

Page: 11 / 84

Federal Signal UltraVoice
Installation and Operation Manual
GENERAL DESCRIPTION
11
1.2 Model Number Descriptions
All UVIC models are set up for 2-way control and status monitoring using the Federal
Commander Digital Control system including a 13.6V radio power supply and antenna
lightning protector. All models include 8 minutes of digital voice storage. Custom digital
voice recording requires a model DVR. All of the following models are available in a
240VAC version by adding a 240 to the model number i.e.: UVICH240.
CONTROLLER OPTIONS UVIC MODEL #
NO RADIO (RF) UVIC
UHF BAND Transceiver UVICU
HIGH BAND Transceiver UVICH
LOW BAND Transceiver UVICL (Special Order)
1.3 Standard Feature Descriptions:
•
Seven standard warning signals
•
Up to 16 digitally stored voice messages; 8 minutes total recording time
•
Local push-button control
•
Local microphone for PA with hanger mounted in cabinet
•
8 remote contact closure inputs for activation
•
Single tone, 2-tone, DTMF, EAS and MSK decoders for remote siren control
•
MSK modem with 128-bit encryption for remote status monitoring over radio or
wire
•
600 ohm I/O for wire-line control and status monitoring
•
15A relay output
•
Quiet test - siren status monitoring
•
Zoning - up to 8 zones per control cabinet for selective control of speaker outputs
•
Power control ramps up siren or speaker volume for added safety, custom volume
settings, and low power testing
•
Stackable siren or distributed speaker functions enable user pre-defined warning
scenarios
•
Low band, VHF, or UHF radio transceiver options
•
Modular design - no inter-board wiring, easy field service
•
Windows
®
based siren programming software (optional)
•
Cabinet:
- Single NEMA1/UL type 1, powder coated steel cabinet
- Single lockable door hasp that can be easily opened without tools
-
Wall mountable
-
8 multi-size knockouts for conduit entrances
- Bulkhead mounted type N female antenna connection