7
Federal Signal
signaling.fedsig.com
Figure 3 Common Internal View
REMOVABLE
MOUNTING PLATE
WITH WIRING
HARNESS (2 X M4
SCREWS)
9 - POSITION
WIRING BLOCK
HOUSING
GROUND
UNLOOSEN FOUR
CAPTIVATED M4 SOCKET
HEAD CAP SCREWS
MODEL CP-PB
UNLOOSEN FOUR
CAPTIVATED M4 SOCKET
HEAD CAP SCREWS
MODEL CP-BG
Mounting the Call Point Station
ATTACH THE STATION SECURELY: To prevent injury, this apparatus must be securely attached to the mounting surface
in accordance with the installation instructions and local jurisdictions and codes. Use installer-supplied fasteners
suitable for the mounting surface.
All models of the Call Point station have the same rear chamber access to four corner oval-shaped holes for mounting
the station to a rigid vertical wall surface. The devices may be mounted by using four M6 metric threaded fasteners or
four 1/4-inch or #12 threaded fasteners that are installer-supplied. Be sure to follow all national and local jurisdictions
and codes as to placement of the station within the appropriate environment.
Figure 4 Mounting Layout
3.622"/ 92mm
3.542"/ 90mm
2.834"/
72mm
