MSS
TM
Series
© Copyright 2022 Fluid Equipment Development Company | www.fedco-usa.com
-
58
-
Specifications
Cleaning
WARNING
NEVER
use petroleum or alcohol based sol
-
vents when cleaning pump components. Sol-
vents can degrade and damage vital seals and
O-rings over time. Use fresh water
with mild soap (Make sure cleaning chemi-
cal are compatible with membranes and other
chemicals in the system) and rinse all compo
-
nents thoroughly with fresh water before as
-
sembly.
Internal Components
Clean all internal components with mild soap
and fresh water. Rinse thoroughly before use.
Internal components should be dried with a
clean, lint free cloth before assembly.
Nameplate
Protect nameplate integrity. Use considerable
caution when cleaning. Do not use products
that may damage painted or engraved surfac-
es. FEDCO recommends soap and fresh water
for cleaning nameplate surfaces.
Inspection
Internal Components
Inspect all internal components for signs of ex-
cessive wear or damage. Pay particular atten-
tion to bearing surfaces. Replace if necessary.
Fasteners
Inspect all fastener threads for signs of wear or
distortion and replace if necessary.
O-rings
Inspect all O-rings for cuts or damage and re-
place as necessary.
WARNING
Using compressed air can be hazardous. Ob
-
serve safety precautions accordingly.
