MSS
TM
Series
© Copyright 2022 Fluid Equipment Development Company | www.fedco-usa.com
-
28
-
Figure 50 -
Removing Throttle Nipple O-Ring
Figure 49 -
Removing Throttle Nipple
Figure 48 - Disconnecting Drain Line
5. Remove the throttle nipple O-ring from the
discharge housing.
4. Remove the throttle nipple from the dis-
charge housing.
ELECTRICAL HAZARD
Make sure to disconnect the power supply to
the motor before carrying out component re
-
placement procedures. Follow all Lock out/Tag
out procedures developed by your company
before starting any maintenance or repair.
Balance Disc Removal
1. Drain the piping and pump.
2. Disconnect the outlet piping.
3.
Disconnect the bearing drain line from the
throttle nipple.
Pump Overhaul Continued
