- 126 -
INF-TN1FSH-E
7.11. Display Setting
Click the “DISPLAY” button on the Menu screen, and the following screen appears.
Fig. 20 <Display setting screen>
To select an item to be set or read, set the relevant check box to ON (
"
). Not to select (or to reset the selection), set
the relevant check box to OFF (
#
). If “Flow rate” is select in the selection items, flow rate unit becomes valid.
[Setting] ..........................................Sends the setting of the selected item (check box set to ON (
"
)), reflecting the
response value on the setting.
[READ]...........................................Reads the setting of the selected item (check box set to ON (
"
)), reflecting the
response value on the setting.
[Save]..............................................Reflects the setting sent by pressing the [Setting] button on the flowmeter flow
transmitter.
[Check ON/OFF] ............................Set the check box to ON to select all the items (to set all the check boxes to ON
(
"
)). Set the check box to OFF (
#
) to release the selection of all the items (to
set all the check boxes to OFF. (
#
))
Table 13 <Display Setting>
Item Content
DISPLAY KIND Select from VELOCITY, FLOW RATE, TOTAL FORWARD, TOTAL
REVERSE, F: TOTAL PULSE, R: TOTAL PULSE, FLOW RATE (%).
DISPLAY 1
Flow Unit
Select from L/s, L/min, L/h, L/d, kL/d, ML/d, m
3
/s, m
3
/min, m
3
/h, m
3
/d,
km
3
/d, Mm
3
/d, BBL/min, BBL/h, BBL/d, kBBL/d, MBBL/d
[ft/s, ft
3
/s, ft
3
/min, ft
3
/h, ft
3
/d, kft
3
/d Mft
3
/d, gal/s, gal/min, gal/h, gal/d,
kgal/d, Mgal/d, BBL/s, BBL/h, BBL/d, kBBL/d, MBBL/d]
* Of which [ ]: unit is in case of inch system.
DISPLAY KIND Same as the selection of DISPLAY 1
DISPLAY 2
Flow Unit
Same as the unit of DISPLAY 1
