- 90 -
INF-TN1FSH-E
4.4.20.3. Initializing setting parameters
Description
Setting parameters stored in a memory can be initialized as follows.
(Setting contents)
•
NOT INITIALIZE: Does not initialize the parameter.
•
FACTORY SETTING: Initializes those other than the adjusted values (such as current output, sensor constant, etc.)
•
PARAMETER SAVE: Overwrite the initial data with the current setting parameter.
CAUTION
•
This parameter is intended for our service personnel.
•
Do not attempt to initialize the setting parameters. Otherwise measurement is disabled.
Operation
(example)
When setting parameters to factory-set values
Key operation
Description
Display
FUNC DETAIL
Display “VERSION INF.”
VERSION INF.
SKIP
"
or
#
Select “SETTING DATA”
SETTING DATA
NOT INITIALIZE
ENTER
"
or
#
ENTER
Enter select/enter mode and then select
“FACTORY SETTING,” and the converter is
reset.
SETTING DATA
FACTORY SETTING
Display the measurement.
(Measurement display screen)
4.4.20.4. Confirmation of software version
Description
The software version of the measurement board and control board can be displayed.
Operation
(example)
The software version can be checked as follows.
Key operation
Description
Display
FUNC DETAIL
Display “VERSION INF.”
VERSION INF.
SKIP
ENTER
"
or
#
ENTER
Enter select/enter mode, select “CHECK,” and
press ENTER.
VERSION INF.
CHECK
Check the version of “MEASUREMENT
BOARD”
MEASUREMENT BOARD
FSH1MES********
"
or
#
Select “.”
Check the version of “CONTROL BOARD”
CONTROL BOARD
FSH1MMI***
ESC ESC
Display the measurement.
(Measurement display screen)
